19
3.5.1 Pad elements (for contourable upper body support)
The reclining surface growth is compensated
by adding/removing pad elements (
A = end
piece + B = intermediate piece
), which are
fixed by means of hook and loop and press
studs (
C
). Remove the pad elements (
A+B
)
prior to every adjustment to the upper body
support (see
Point 3.5
) and reattach the
required combination of pads.
At the lower edge of the upper body
support pad (
D
) there is a connection piece
(
E
). To this, up to three intermediate pieces (
B
)
as well as one end piece (
A
) can be affixed
using press studs (
C
).
Depending on how the upper body support
length is adjusted, the intermediate pieces
(
B
) must be removed or added and the end
piece (
A
) might have to be moved upwards
by 1-3 positions (
F
).
To remove a pad, loosen the press studs on
both sides of each pad (
C
). Please store pad
elements that are not required in a dry place.
3. Settings.
A
D
B
A
C
A
E
A
F