10
3.8 Lower armrests (optional for MALTE)
The lower armrests can be equipped with a hand-
le or grip ball. They can be adjusted in depth,
height, angle and inclination.
Depth adjustment
Loosen the cylinder head screw with inner he-
xagon (A) beneath the lower armrest. Now you
can slide it onto the pipe (B) and bring it into the
required position.
Height adjustment
The handles are used to set the height (see
points 3.2.1 + 3.2.2).
Adjustment of the angle
The angle (C) is set using a locking hinge. Loo-
sen the cylinder head screw with inner hexagon
(A) beneath the lower armrest and bring the lo-
wer armrest into the required position.
Angle adjustment
Loosen the cylinder head screw with inner hexa-
gon (A) beneath the lower armrest to set the in-
clination (D) and bring the lower armrest into the
required position.
B
C
D
A
E
After each adjustment, please re-tigh-
ten all screw connections!
3.9 Handle / grip ball for lower armrests
(optional for MALTE)
Loosen the hexagon socket screws (E) and bring
the grip (F) or grip ball (G) into the required po-
sition.
G
F