The
Twitch Switch
utilizes small muscle movement to activate any
device which requires a switch, enabling the individual with limited
motor skills to control the device with a wrinkling of the forehead, a
slight flexing of the arm, or a twitch of the finger. Many other
applications are possible using the hypoallergenic tape provided with
the unit.
DESCRIPTION OF FEATURES
:
On-Off/Sensitivity Control:
The left-hand knob is used to turn the
unit on and off, and to adjust the sensitivity of the
Twitch Switch
.
Turn the knob clockwise to increase sensitivity and counterclockwise
to decrease.
Mode Selector/Timing Control
: The right-hand knob is used to
select one of the three modes of operation - Latch Mode, Momentary
Mode, or Timed Mode (See “Set-up and Operation”). In Timed Mode,
this control is also used to select the amount of time (from 2 to 40
seconds) that you wish the device to remain on after activation of the
switch. Turn the knob clockwise to increase the duration and
counterclockwise to decrease.
“Switch On” Indicator Light
: The green lamp on the face of the unit
will light to indicate that the switch is currently activated.
Sensor Element Jack
: The small jack facing the user is used to plug
in the flexible Sensor Element.
Sensor Element
: The flexible Sensor Element is provided with non-
irritating tape for convenient placement, and is plugged into the
Sensor Element Jack.
Device Output Jack
: The small jack facing the user is used to
connect a toy, computer, audio/video or communication device that
has a 1/8" plug.
SET UP AND OPERATION
1. Turn unit over carefully to reveal the battery compartment. Install
one “9V” battery, observing proper polarity, and secure by pressing
down into the clip.
2.
Plug Sensor Element into the control unit. Select a comfortable
location for the flexible Sensor Element and affix securely to the
body using the supplied non-irritating tape. Area should be free
of oil and perspiration. It is advisable to attach the Sensor
Element cord in several points along its way as well, to prevent it
from activating the sensor during unrelated movements of the
user.
3.
Plug device to be controlled into the large Device Output jack.
4.
Turn unit on and adjust sensitivity to the desired level. “Switch
On” indicator may remain lit with sensitivity control set to
“MAX.” Turn knob counterclockwise until light goes off.
Experiment with different settings until switching action is easily
controlled.
5.
Select Mode of operation:
Latch Mode
: Turn the right-hand knob fully counterclockwise
until it clicks into “Latch” position. Device will turn on with
movement of Sensor Element and remain on until turned off by
the next movement.
Momentary Mode:
Starting from the “Latch” position, turn knob
clockwise until it clicks. Set “Timing” pointer to “MIN” position.
Device will turn on, then off immediately with each movement of
the Sensor Element.
Timed Mode
: Starting from the “MIN” position in Momentary
Mode, turn knob clockwise until the desired timed cycle, from 2 to
40 seconds, is selected. Device will turn on with movement of the
Sensor Element and remain on for the duration of the cycle.
APPLICATION NOTES:
The
Twitch Switch
is designed primarily to be activated by the
wrinkling of user’s forehead. For best results, attach the Sensor
Element to the center of forehead, and make sure the Element is
already slightly arched forward when forehead muscles are
relaxed. This will result in maximum bending of the element
during the wrinkling and generate best possible input signal.
Bear
