Schuchmann MALTE Series, Assembly Instructions Manual, Page: 8 / 12

8
www.schuchmann-reha.de · info@schuchmann-reha.de
Sep 8: Now pull the cover cap (A) back onto the Bowden cable and
slide the clip (B) into the handle tube.
A
B
Step 9: Now slide the cover cap back onto the handle pipe, take one
of the supplied hexagon socket screws (short) and tighten it with a 5
mm Allen key.
Now you can remove the old handle holder on the MALTE (remove
the pelvis pad beforehand if necessary) and then slide the new handle
holder into the frame.
C
Step 10: Now you can slide the Bowden cable back through the brake
(D) at the bottom and pull spring (E) onto the Bowden cable.
E
D