7
www.schuchmann-reha.de · [email protected]
Step 5: Pull the Bowden cable (A) out of the brake handle. Then take
the nut (B) off the Bowden cable and pull it onto the new Bowden cable
supplied.
tip: Cut a little off the end of the Bowden cable before pulling it out so
it can be easily pulled through the outer sleeve.
A
B
Step 6: Now guide the new Bowden cable through the brake handle (C)
then slide this back into the outer sleeve (D).
C
D
Step 7: Then pull the Bowden cable through the mount on the new
handle holder (E) then also insert the entire handle tube (F).
F
E
