10
3. Settings.
3.2 Seat angle
The release lever (
A
) for the seat angle ad-
justment is mounted directly at the gas pres-
sure spring and equipped with a child lock.
To adjust the angle of the seat unit, first re-
lease the clamping lever (
B
). The push the
release lever (
A
) horizontally until it engages.
The seat unit can now be adjusted in an ac-
tive or passive position. For additional secu-
rity, tighten again the clamping lever (
B
).
Optionally the release lever can also be moun-
ted on the push handle.
3.3 Seat depth
To adjust the seat depth, loosen the two
wing screws (
C
) under the seat unit. Then the
seat surface can be moved continuously for-
wards or backwards.
After each adjustment, please retighten all
screw connections!
3.4 Back inclination
The clamping lever (
D
) for the back angle
adjustment can be found on the right side
of the seat. To adjust the back angle, first
loosen the hexagon socket screw (
E
) on the
additional stabilisation of the seat angle (
F
)
and remove the screw (
E
). Now release the
clamping lever (
D
) and bring the back into
the desired position. Subsequently tighten
again the clamping lever and bring the ad-
ditional stabilisation of the seat angle (
F
) in
position with the hole pattern so that you
can mount again the hexagon socket screw
(
E
) and tighten it.
Ensure that, during setting / adjustment of the back inclination, no body parts
are trapped in the area of the setting / adjustment mechanism in order to avoid
injuries.
After each adjustment, please retighten all screw connections!
C
C
A
B
E
D
F
