12
4. Accessories.
4.1.2 Mobile & rigid subframe
The mobile and the rigid subframes
can be adjusted in height. In order
to lower the seat, press both levers
for the height adjustment (
A
) on the
lengthways struts on the frame, while
supporting the weight of the seat. Lo-
wer both sides evenly so that the seat
does not block.
Fold the foot bench up (see
4.9
) to put
the seat up, place one foot on the
subframe (
B
) of the frame and lift up
the seat frame (the lever for height adjustment must not be released).
The height may only be adjusted when not in use!
It is possible to set the seat tilt on the
mobile subframe. Press the adjustment
lever (
C
) on the right, rear side of the
seat to release the two gas pressure
springs. The seat can be tilted 15 ° to
the front and 15 ° to the back or 5° to
the front and 25° to the back.
hts.
can
be easily tilted with the user seated in
the unit by applying a little force.
In order to apply the brake, press the
brake lever (
D
) downwards. Put the le-
ver back up to release the brake.
4.1.3 Bath subframe
The bath frame is for use in a bath
in order to allow the user to bathe or
shower (see
4.1
for assembly of the
seat unit on the subframe).
A
C
D
B
