10
3. Settings.
fridolin 2.
: The sub-frame can be lo-
wered to low table heights using the
height adjustment by means of a gas
pressure spring. To this end, the foot
pedal (
A
) on the right-hand side of the
base frame is operated (in driving di-
rection) and the seat pan slides down.
If required, assist the movement by
applying slight pressure from above. To move the seat pan upwards, press
the foot pedal again and assist movement through application of slight
pressure upwards if necessary. The foot pedal can be secured against in-
advertent operation with a lock located on the inside of the foot pedal.
To this end, pull on the knurled knob (
B
), turn it to the right as far as it will
go and then release it again. Now the foot pedal is secured against in-
advertent operation. The locking mechanism is released by pulling on the
knurled knob
(B
) and turning it to the right.
For safety reasons, the adjustment may only take place when no-one is
on the product!
3.3 Seat angle adjustment
In order to adjust the angle of the seat unit, the
hand trigger (
C
) at the rear below the seat pan
holder must be actuated (by pulling it). To do
this, the rear part of the lever must be pressed
into the plug lock. This deactivates the child
lock. The seat unit can now be adjusted in an
active or passive position. The release lever (
D
)
for the seat angle adjustment can also be
mounted on the push bar / handle or on the
back of the seat pan if used later.
When adjusting the seat angle, always secure the
seat pan with one hand!
A
B
C
D
