Independent Living Specialists PTY LTD
Unit 1 /12 Mars Rd,
Lane Cove NSW 2066
1300 008 267
ilsau.com.au
Hero Medical
Outdoor Lite Walker
USER MANUAL
Instructions for use
4.
ADJUSTING LENGTH OF THE BACKREST
Press the silver clip located near the front of the handle. Keep
pressing the button whilst simultaneously pulling the end of the
backrest to adjust. There are 4 levels of adjustment.
5.
ATTACHING AND REMOVING THE CARRY BAG
For Carbon Fibre Walker : To attach the carry bag, insert the loops at
the top of the carry bag to the poles located at the front end of the seat.
Apply the velcro straps to secure it to the frame. To remove the bag,
undo the velcro straps and pull it out from the poles.
For Aluminium Walker : To attach the carry bag, locate the black cap at the
front end of the seat. Rotate the cap anti-clockwise untill it stops and pull
it out. Then, insert the flap located at the top side of the bag into the pole.
Put the cap back on and rotate it clockwise to lock it. Follow the same
process for both sides.
Safe Work Load for bag is 5kg.
6.
FOLDING THE SEAT WALKER
Pull the handle located in the middle of the seat upwards to unlock
the frame. Grab both handles and push inwards to fold the seat walker.
* (For Aluminium Walker : Once the walker is folded, clip the grey safety clip onto
the seat frame locking the walker in place.)
7.
CANE HOLDER
Carbon Fibre Walker comes with walking stick holder, which consists of
2 attachments that can be clipped onto the frame. Clip the attachment
containing 3 holes, above either back wheels. Then clip the smaller
attachment on the same side of the frame below the handle bars.
* (For Aluminium Walker : Cane holder is available as an additional
accessory for purchase.)
1.
UNFOLDING THE SEAT WALKER
Grab both handles, pull outwards until the frame is half-open.
Place both hands on each side of the seat and push downwards
XQWLO\RXKHDUɞFOLFN
*
)RU$OXPLQLXPZDONHUVSOHDVHXQFOLSWKHJUH\VDIHW\FOLS̛UVWWRXQIROG
2.
BRAKE FUNCTIONALITY
To apply the handbrake pull the brake lever up. To engage the
parking brake, press the brake lever down until it locks. To
disengage the parking brake, pull the brake lever up.
3.
ADJUSTING THE HEIGHT
To
increase
the height of the seat walker, press the red or grey
button located underneath the handle. Keep pressing the button
whilst simultaneously pulling the handle upwards until you reach
your desired height. Release the button to lock it in place.
To
decrease
the height, press the red or grey button and push
the handle downwards to your desired height.
There are
6 levels
of height adjustment. Repeat process for both
handles.
)RU+HDY\'XW\$OXPLQLXP:DONHƯUVWXQGRWKHUHGORFNLQJFOLSWR
unlock the handles.)
Red button for
Carbon Fibre Walker
Grey button for
Aluminium Walker
**Red button for
Heavy Duty
Aluminium Walker
* Aluminium walkers only
* Aluminium walkers only
* Aluminium walkers only
