07
4. Accessories.
4.4 Grip rings
If the
dynamic pacer.
is used as an anterior
walking aid, it is recommended to mount the
grip rings (
A
) in front of the cross strut (
B
) of the
top frame (
C
). This creates a stable position
and leaves sufficient space for further acces-
sories. The grip rings (
A
) can be mounted on
both the outside and on the inside of the fra-
me for thinner users. In this way, the grip rings
(
A
) can be positioned close to the user in any
situation.
Release the handle (D) in order to:
• Remove the adaptor (
E
) with the grip
rings (
A
).
• Move the grip rings down (
A
) including that
of the adaptor (
E
).
In order to adjust the height of the grip rings
(A):
• Press the button (
F
), bring the grip ring (
A
)
into the required height and then
release the button (
B
) again. An audible
clicking noise is heard when the grip ring
(
A
) engages in the adaptor (
E
).
In order to change the alignment of the grip
rings (A):
• Press the button (
F
), pull the grip ring (
A
) out
of the adaptor (
E
) and insert the grip ring (
A
)
in the required alignment back into the adap-
tor (
E
).
In order to adjust the angle of the grip rings
(A):
• Loosen the wing screw (
G
), bring the grip
ring (
A
) into the required angle and
re-tighten the wing screw (
G
).
To prevent injuries, do not mount the grip rings onto the foremost end of
the top frame (H)!
Then firmly re-tighten the screws again after each setting/adjustment!
C
A
B
E
G
H
F
D
Summary of Contents for Dynamic Pacer
Page 1: ...Instructions for use dynamic pacer The dynamic walking aid dynamic pacer ...
Page 2: ......
Page 36: ...schuchmann de ...