Schubert 10009095, Instruction Manual

Page: 13 / 31

13
Preparation before performance
Use AC/DC power adapter
Please use the special AC/DC power adapter provided with this electronic organ or the power adapter with DC 12V
voltage and >1A out current and with central anode. Connect the DC plug of power adapter into the DC12V power
socket in the rear of electronic organ. Then connect the other end into main socket (see that the input voltage of
power adapter conform to the voltage of electric supply), finally turn on power switch and start performance. When
you do not use this electronic organ for a long term, you should pull out the plug of power adapter from main
socket safely to avoid possible causing trouble of part or other accident in long term charging.
Use of Batteries
Open the battery lid in the bottom of electronic organ and load eight 1.5V Size D batteries. Ensuring the pola-
rity should conform to the direction marked on battery lid. Replace the lid after loading batteries.
Caution: Do not use batteries of different kinds and mix new and old batteries. Low batteries will cause low
volume or poor timbre and replace batteries at that time. To avoid possible damage caused by battery liquid
leakage, please take out batteries if you will not use the electronic organ for a long term.
Fitting Jack
Use of Headphone
Connect headphone plug into “HEADPHONE” jack in the rear of electronic organ. Now the internal speakers
are automatically switched off. Use of headphone in performance does not interfere with anybody else, suiting
personal monitor and exercising at night.
Connection with Amplifier or Hi-Fi Equipment
This electronic organ has built-in speaker system. Alternatively, it can also be connected to any external am-
plifier or hi-fi equipment. First turn off the switch of electronic organ and external equipment, then insert one
end of stereo audio cable into LINE IN or AUXIN jack of other hi-fi equipment and connect the other end into
OUT L/R jack in rear panel of electronic organ.
Basic Operation
Basic playing method
Turn on power switch: After AC adapter is connected or batteries installed cor-
rectly, press POWER button to turn on power switch. Press POWER button
once again to turn of power switch of electronic organ.
Adjustment of Volume: This electronic organ has 16 levels of volume from 1 to 16
for your choice. The default level of volume is 12 Press Volume Up/Dn key, volu-
me will be increased or decreased accordingly and correspondent change will be
displayed on LED. Press Volume Up/Dn keys simultaneously, the VOLUME will
be restored to the default level automatically. Meanwhile you adjust volume; the
accompanying volume will also be changed accordingly.