3
B. Using provided hardware and new o-ring, install the stainless tank adapter as shown.
NEW O-RING
S.S. TANK ADAPTER
SECURE
WITH (3)
1/4”
SCREWS
(T-15)
FLAT EDGE
TO FRONT
C. Using provided hardware, install the lower probe housing as shown.
LOWER IN 3 PRONG
ADAPTER BASE
ALIGN 4 SCREW HOLES WITH
MAGNET TOWARDS FRONT
SECURE
WITH (4)
3/8”
SCREWS
D. Install the new control module as shown.
1. Match alignment screw bore and ribs on module case to lower probe housing.
2. Connect the four prong module power cord to the pigtail installed in Section 2.
SECURE
WITH (3)
1” SCREWS
ALIGN 3 SCREW
BORES
ENSURE RIBS MATCH
UP ON MODULE AND
HOUSING
