29
NO
SE
FI
GB
DE
DK
PL
ES
Unscrew the holders (C) and bolts from the
brackets. Loosen the adjustment screws
(A) on the brackets using an Allen key (B)
and pull the support plate out so that the
distance to the bracket is at least 40 mm.
At a distance of 45 mm, the angle of the
awning to the wall will be 80°.
NB! The support plates must be lined up on
all the brackets.
Insert the awning unit (10) into the brackets.
Tighten the awning securely in the brackets
with the holders (C) and bolts (D). Tighten
the lock nuts on the brackets.
Use a spirit level to check that the awning
is straight. If this is not the case, loosen
the lock nuts on the wall brackets, turn
the adjustment screw until the awning is
straight and re-tighten the lock nuts.
You can change the angle of the awning in
relation to the wall in the same way.
Check that the awning is securely mounted.
Connect the awning cord (9) to a suitable
power outlet.