5
Installation (continued)
3
Installing the drain body
□
Apply silicone sealant (not included) under the
drain flange (E) and place the drain flange (E)
into the drain hole of the sink.
□
From underneath the sink, screw the drain
body (H) onto the drain flange (E). Ensure that
the opening (1) for the ball rod on the drain
body (H) faces towards the rear of the sink.
4
Installing the stopper and
horizontal rod
□
Tighten the rubber washer (F) and lock nut (G)
on the drain body (H). Do not overtighten.
□
Insert the stopper (D) into the drain hole in the sink.
□
Before installation, unscrew the protective cap (1)
from the horizontal rod (J).
□
For easier removal and cleaning, rotate the
stopper (D) 90 degrees so that the horizontal rod (J)
does not go through the hole in the stopper (D).
See insert 3.
□
Make sure the joint (I) on the horizontal rod (J)
inserts into the drain body (H) completely, as
shown (4). You can press the two sides of the
joint (I) to remove the horizontal rod (J).
□
Insert the horizontal rod (J) into the drain body (H)
and through the hole of the stopper (D). See insert 2.
1
2
E
F
G
SILI
H
1
2
3
Insert 3
Insert 2
2
H
1
D
I
J
H
I
4
1
J
www.schonsimplymodern.com
Please contact (800) 880-8164 for further assistance.
