EN
28
Extra drying
To improve the dryness level of the crockery, press
the EXTRA DRYING button and the indicator light/symbol will
light up. If it is pressed again, the option will be deselected.
A higher temperature during the final rinsing and a longer
drying phase improve the dryness level.
The EXTRA DRYING option increases the duration of
the wash cycle.
Multi-functional tablets
(Tabs)
This option optimises washing and drying results.
When using multi-functional tablets, press the MULTI-
FUNCTIONAL TABLETS button; the corresponding indicator
light/symbol will light up. If the button is pressed again, the
option will be deselected.
The “Multi-functional tablets” option results in a
longer wash cycle.
The use of tablets is only recommended for models
having this option and it is not recommended with wash
cycles which do not specify the use of multi-functional
tablets
.
Special wash cycles and Options
Notes:
Optimum performance levels when using the “Fast" and "Express
30’” cycles can be achieved by respecting the specified number
of place settings.
To reduce consumption, only run the dishwasher when
it is full.
Note for Test Laboratories:
for information on comparative EN
testing conditions, please send an email to the following address:
assistenza:[email protected]
Localized Wasch Tech 3 liv
This option makes it possible to carry out the wash
cycle in the selected rack only. Select the wash cycle and
then press the
LOCALIZED WASCH TECH 3 LIV
button: the
selected rack lights up and the wash cycle starts in the
selected rack only. Press the button again to deselect the
option.
The option is available with the following wash cycles:
Intensive
and
Normal
.
Select the option and the
Intensive
cycle to start the
ULTRA
INTENSIVE ZONE
washing. This wash cycle is ideal for very
soiled mixed loads, e.g. pans and saucepans, dishes with
heavy encrustation or difficult-to-clean crockery (grater,
vegetable mill, dirty cutlery). The spraying pressure is
stronger and the washing temperature higher, thus ensuring
optimum handling of stubborn stains.
Select the option and the
Normal
cycle to start the
ECO ZONE
washing. This function makes it possible to reduce energy
consumption. Cycle duration might change.
Remember to load the crockery in the selected rack only
Delayed Start option
It is possible to delay the start of the cycle for a period
of time between
1 and 24
hours.
1. After selecting the desired wash cycle and any other options,
press the DELAYED START button: the indicator light will go on.
Press the DELAYED START button to select the time at which
you wish the wash cycle to begin (1 to 24 hours.)
2. Confirm your selection using the Start/Pause button; the
countdown will begin. The selected delay period is displayed.
3. Once this time has elapsed, the DELAYED START indicator
light goes off and the wash cycle begins.
To deselect it, press and hold down the DELAYED START button
until the text
OFF
appears.
The Delayed Start function cannot be set once a wash
cycle has been started.
Wash options*
The OPTIONS may only be set, changed or reset after
the wash cycle has been selected and before the Start/
Pause button has been pressed.
Only the options which are compatible with the type of wash
cycle set may be selected. If an option is not compatible
with the selected wash cycle
(see Table of wash cycles)
, the
corresponding symbol/indicator light flashes rapidly 3 times.
If an option is selected which is not compatible with another
previously-selected option, it will flash 3 times and go off,
while the most recently selected option will remain active.
To deselect an option which has been set by mistake, press
the corresponding button again.
*
Only available in selected models.
Summary of Contents for LPE P832
Page 16: ...16 FR...
Page 32: ...EN 32...
