2
9
G
B
S
a
f
ety
devices
The door is locked automatically as soon as the
temperature exceeds a certain value.
Should a malfunction occur, the heating elements
will switch off.
Once the oven door has been locked, you cannot
change the cycle time and end time settings.
Programming is possible only after selecting the
PYROLYTIC cycle mode.
P
ro
g
ra
mm
in
g
de
l
a
y
ed
a
u
to
m
ati
c
c
l
eanin
g
1. Press the button.
2. Select the COOKING END TIME command and
press OK to confirm.
3. Adjust the hour figure using the or buttons.
4. Press the OK button to confirm.
5. Press the or buttons again to set the
minutes.
6. Press the OK button to confirm.
7. Press the START/STOP button to enable the
programming process.
8.
W
hen the set time has elapsed, a buzzer will
sound and the oven will switch off.
For example: it is
9
:00 a.m. and the Economy
PYROLYTIC cycle has been selected: default set
time 1 hour. 12:30 is selected as the end time. The
programme will start automatically at 11:30 a.m.
The message awaiting pyrolytic cycle shows that a
programme has been scheduled. The display shows the
pyrolytic cycle end time and the duration alternately.
To cancel programming press the button.
O
n
c
e
t
h
e
a
u
to
m
ati
c
c
l
eanin
g
c
y
c
l
e
is
o
v
er
You will have to wait until the temperature inside the
oven has cooled down sufficiently before you can
open the oven door. You will notice some white dust
deposits on the bottom and the sides of your oven;
remove these deposits with a damp sponge once
the oven has cooled down completely. Alternatively,
you can make use of the already heated oven, in
which case it is not necessary to remove the
deposits, they are completely harmless and will not
affect your food in any way.
