22
11. Menu and settings via the membrane keypad
11.1. LED indicators
1. LED High voltage (25)
Green:
High Voltage is off
Red:
High voltage is on (LED is blinking,
until voltage is discharged)
2. LED operation (22)
Green:
AFP is powered and main switch
is I
ON
3. LED ground (23)
Yellow:
not grounded
4. LED malfunction (24)
Red:
malfunction
11.2. Keys and functions
1. Use the High voltage up/down keys (16)
to set the high voltage.
2. Use the Blower Up/Down keys (17)
to set the blower.
3. Use the Dosing Up/Down keys (18)
to set the flock dosing.
4. Use the Up/Down keys (19)
to scroll through the presets and menu items.
5. Press the menu key (20)
to access an extended setup.
6. Actuation key (21)
to confirm the entries.
11.3. Settings
1. As soon as a setpoint is adjusted, the "Preset" display
flashes,
indicating that a value has been adjusted but not yet saved.
2. To save the settings in the preset, press the Enter key
for approx. 3 seconds.
To discard the settings again, simply change the preset with the Up/Down keys (19)
and change back again.
22
23
24
25
Summary of Contents for 810489
Page 1: ...1 Art Nr 810489 80 kV 300 A...
Page 37: ...37...
