Schneider Airsystems SGS-HW 141, Original Operating Manual

Page: 22 / 52

II /10
RAS - SGS
GB
2.9 Troubleshooting
Observe the safety instructions and maintenance instructions!
*For troubleshooting: refer to the information in the "Technical data" chapter in part 1 of the instruction manual!
If necessary, contact our service staff, see last page.
2.10 REACh
REACh is a European Chemical Directive that
came into effect in 2007. As "downstream
users" and product manufacturers, we are
aware of our duty to provide our customers
with information. We have set up the follow-
ing website to keep you updated with all the
latest news and provide you with information
on all the materials used in our existing prod-
ucts:
www.schneider-airsystems.com/reach
Problem Cause Remedy
A Screws do not unscrew Socket spanner worn
X
Replace the socket spanner
Air regulation adjusted
incorrectly
X
Correct air
regulation
*
Working pressure (flow pres-
sure) too low
X
Increase working pressure
(flow pressure) Observe
maximum working pressure
*
Compressor output too small X Use different output
rating
*
Hose diameter too small X Use correct hose diameter
*
B Square bar does not
retain the socket span-
ner Socket spanner worn X Replace the socket spanner
Retaining ring (item 06) /
Retaining ball (item 07) faulty
or missing X Contact Schneider Airsys-
tems or your local service
partner
Square bar on the drive shaft
(item 05) worn X Contact Schneider Airsys-
tems or your local service
partner.