3 Assembly and start-up
SCHMIDT
®
TorquePress 520-560
– V2.1
11
TorquePress 560
To lift the press, you need a lifting equipment.
Remove the side covers from the transport brackets.
To lift the press vertically, turn the lifting screws for the lifting equipment
into the threaded holes provided. These are located on the side of the
press.
To lift the press horizontally, in addition turn a lifting screw into the
threaded hole in the guide flange.
Figure 4: Lifting equipment (example)
1
Lifting screws (M16)
2
Guide flange with threaded hole
Place the press onto the frame/frame system.
Make sure that the fastening holes of the press are lined up precisely
with the holes in the frame/frame system.
Screw the press tightly from below with the following torques.
Use screws with the appropriate property class.
Press type
Screw
Property class
Torque
520
4 x M10x40
10.9
64 Nm
560
6 x M14x60
12.9
138 Nm
Mounting the press
