Instructions for Use
– SCHMIDT
®
LED Measured Value Display MD 10.010
Page 3
1 Important information
These instructions for use contain all required information for a fast com-
missioning and a safe operation of
SCHMIDT
®
LED measured value dis-
plays:
These instructions for use must be read completely and observed care-
fully, before putting the unit into operation.
Any claims under the manufacturer's liability for damage resulting from
non-observance or non-compliance with these instructions will become
void.
Tampering with the device in any way whatsoever - with the exception
of the designated use and the operations described in these instruc-
tions for use - will forfeit any warranty and exclude any liability.
The unit is designed exclusively for the use described below (refer to
). In particular, it is not designed for direct or indirect protec-
tion of personal or machinery.
SCHMIDT Technology
cannot give any warranty as to its suitability for
certain purpose and cannot be held liable for errors contained in these
instructions for use or for accidental or sequential damage in connec-
tion with the delivery, performance or use of this unit.
Symbols used in this manual
The symbols used in this manual are explained in the following section.
Danger warnings and safety instructions. Read carefully!
Non-observance of these instructions may lead to injury of per-
sonal or malfunction of the device.
High voltage hazard
– risk of life.
ESD susceptible elements
(electrostatic discharge).
General note
All dimensions are indicated in mm.
!
