4
These operating instructions are an integral component of the device. They must be
accessible at all times and passed on to future users. If there is something you do not
understand please contact your supplier.
The manufacturer reserves the right to continue to develop this device without docu-
menting this in all cases. Your supplier will be pleased to inform you of updates to these
operating instructions.
1. Intended use
This device is intended for monitoring the movement of rotating and vibrating objects. It may
only be used in accordance with these operating instructions. No alterations may be made to
the device. The manufacturer is not liable for damage resulting from improper or non-intended
use. In this case the right to claim under guarantee is rendered void.
2. Safety advice
The device may not be opened, other than to change the battery (see chapter 5).
WARNING!
In stroboscopic light, moving objects appear to be still or in slow motion. Do not
touch the objects under any circumstances.
WARNING!
The device may not be used in areas where there is a danger of explosion.
WARNING!
Stroboscopic light can trigger epileptic
ts in susceptible people.
ATTENTION!
Repairs on the device may only be carried out by the manufacturer or the supplier.
ATTENTION!
The electronic components of the device contain substances which are harmful
to the environment. They must be disposed of in compliance with the environmental guidelines
which apply in the country of use.
3. Switching on the device
To switch on the device, please follow these instructions:
• Place batteries / charged rechargeable batteries (optional) into the device.
• Point device towards moving object and switch on. To switch the device on
hold down button A for approximately 3 seconds.
• The device will
ash at the most recently set frequency. The display shows the set
ash frequency in
ashes per minute.
If the
ash frequency corresponds to the motion frequency, a static image will be created. If
necessary, reset to the default settings by pressing buttons B and F simultaneously.
INFORMATION! Static images are not only created at a precisely corresponding
ash frequen-
cy, but also at multiples and fractions of this frequency.
�
�
�
�
Operating instructions
Stroboscope pocket LED
Stroboscope pocket LED T
with trigger connection
