15
SLC440 Series
SLG440 Series
Operating instructions
Safety light curtain / safety light grid
EN
4.7 Accessories, included in delivery
Mounting kit MS-1100
The mounting kit consists of 4 pcs steel angles and 8 pcs fixing
screws
5,5
17
28
24
7
11
24
38
MSD5 spacer
The kit comprises 2 pcs of spacers and is included in delivery as of a
protection field height of 1050 mm The spacers must be used in case
of vibrations
M4
10
8
33
7,7
4.8 Optional accessory
Centre support MS-1110
Mounting kit consists of 2 pcs steel angles and 4 pcs spacers for
central fixing
4
27,8
11,5
19,5
11,5
54,3
69
38
5,5
3
27
3
7
Connecting cable for emitter
Article No. Designation (description)
Length
101207741 KA-0804 (female connector M12, 4-pole)
5 m
101207742 KA-0805 (female connector M12, 4-pole)
10 m
101207743 KA-0808 (female connector M12, 4-pole)
20 m
Connecting cable for receiver
Article No. Designation (description)
Length
101207728 KA-0904 (female connector M12, 8-pole)
5 m
101207729 KA-0905 (female connector M12, 8-pole)
10 m
101207730 KA-0908 (female connector M12, 8-pole)
20 m
Adapter cable for parameter setting
Article No. Designation (description)
Length
101217615 KA-0974 (Y-distributor with command device)
1 m
Status indicator
The status indication at the receiver indicates the switching condition
of the outputs OSSD1 and OSSD2 and the function restart interlock /
setup
Green = outputs H-signal 24V
Red = outputs L-signal 0V
Yellow = restart interlock
Blue = setup mode/Bluetooth
Test rod PLS
The test rod is used for testing the protection field
MSD4 Vibration damper
Kit consists of: 8 pcs vibration dampers 15 x 20 mm, 8 pcs M5 cylinder
head screws with hexagon socket, 8 pcs spring washers Mounting
using MS-1100
The MSD4 vibration damper kit is recommend to be used for damping
vibrations and oscillations on the AOPD For applications with higher
mechanical stresses, eg presses, punching machines, we recommend
the MSD4 kit In this way, the availability of the AOPD is increased
