ü
This symbol represents a prerequisite that must be met prior to an operational step.
4
This symbol represents an action to be performed.
ð
This symbol represents the result of an action.
Actions that consist of more than one step are numbered:
1. First action to be performed.
2. Second action to be performed.
2 Fundamental Safety Instructions
2.1 Safety
CAUTION
Noise pollution from leakage
Hearing damage
4
Correct position.
4
Wear ear protectors.
CAUTION
Falling product
Risk of injury
4
Securely attach the product at the site of operation.
4
Wear safety shoes (S1) and safety glasses when handling and mounting/dismounting the prod-
uct.
2.2 Intended Use
The mechanical clamp VCMC is used for clamping dry, rigid workpieces. It may be used only in combination with
suitable clamping consoles from SCM. The VCMC is to be installed by the customer.
The VCMC-S6 is attached to the console and secured by activating the customer’s clamping mechanism.
When the operating vacuum is switched on, the workpiece is clamped by means of a vertical stroke of the clamp-
ing disc.
To guarantee safe operation of the VCMC, ensure the following:
•
During installation, the clearance between the workpiece surface and the clamping disc must be no more
than 6 mm. Caution: crushing hazard!
•
Do not allow anyone to reach between the workpiece and the clamping disc during the lowering process.
The workpiece is released by switching off the operating vacuum and venting the vacuum circuit.
The product is built in accordance with the latest standards of technology and is delivered in a safe operating con-
dition; however, hazards may arise during use.
The product is intended for industrial use.
Intended use includes observing the technical data and the installation and operating instructions in this manual.
2.3 Non-Intended Use
Schmalz accepts no liability for damages resulting from use other than as intended. In particular, the following are
considered non-intended use:
•
Use in potentially explosive atmospheres
•
Use in medical applications
2.4 Personnel Qualifications
Unqualified personnel cannot recognize dangers and are therefore exposed to higher risks!
1. Task only qualified personnel to perform the tasks described in these Operating instructions.
2. The product must be operated only by persons who have undergone appropriate training.
4 / 13
EN-US · 30.30.01.03042 · 00 · 10/21
