4 / EN
EN· 30.30.01.02952 · 00 · 07/21
Flow rates
Type
Compressed air
connection [mm]
Max. suction rate
[Nl/min]
Air consumption
[Nl/min]*
Type of ejector
FXP-i-SW-442
12/9
1030
250
1xSEM-P 50
FXP-i-SW-640
12/9
1350
375
1xSEM-P 75
FXP-i-SW-838
12/9
1600
500
1xSEM-P 100
FXP-i-SW-1234
2x12/9
2940
875
1xSEM-P 75
1x SEM-P 100
FXP-i-SW-1432
2x12/9
3180
1000
2xSEM-P 100
* Air consumption: at the optimum operating pressure of 5.8 bar
3
Operating and Menu Concept
The area gripper is operated using two buttons on the foil keypad.
MENU BUTTON
PLUS BUTTON
Navigation is divided into three menus:
•
The main menu: for standard applications
•
The Extended Functions (EF) menu: for applications with special requirements
•
The Info menu (INF): for reading out system data such as counters, the software version, etc.
If settings are changed, undefined states of the system may occur for a short time (for approx. 50 ms).
The following information can be shown on the display:
•
The current vacuum measurement value
•
The selected menu item
•
The settings
•
Error messages in the form of error codes
The operating menu’s home screen shows the currently measured vacuum level in the selected display unit. The
available units are millibar, kilopascal, inHg and psi. The measured value is displayed as positive compared to the
ambient air pressure.
3.1.1
Displaying the Basic Settings (Slide Show)
When you press the
button from the home screen, the following parameters are automatically displayed one
after the other on the display (slide show):
•
The vacuum unit
•
The current operating mode (
or
)
•
The currently activated production setup profile (P-0 to P-3)
•
The value of switching point SP1
•
The value of reset point rP1
•
The value of switching point SP2
•
The value of reset point rP2
•
The supply voltage US
The display cycle returns to the vacuum display after a complete cycle or can be canceled at any time by pressing any
button.
