OPERATOR'S MANUAL
22
Subject to technical changes
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
Gateway
Version: 27143
8.2
Set-up - Settings
8.2.1
Teach-in mode
Figure 11
In teach-in mode, all stored bus subscribers are deleted and a new initialisation process
is started, see chapter 7.2
This procedure is required when devices are replaced or completely removed.
8.2.2
Changing the myfluvo® password
Figure 12
In the delivery state, the device password and the “myfluvo®” password are identical. To
create an individual “myfluvo®” password, enter your desired new “myfluvo®” password
and confirm it by entering the device password. The device password can be found in
the terminal compartment under 4.2 device-specific data or on the device card. The
“myfluvo®” password can be reset to the factory setting by leaving the field blank and
confirming with the device password.
