Schleuniger EcoCut 3300, Reference Manual

Page: 52 / 108

8. Operation of the control software
52|108
Reference Manual |Edition 4.0 (10-2013) |EcoCut 3300
8.8.4
Reset password
5-4
This menu item is only shown with activated user level
„Service“. This menu item resets all passwords to the
factory setting.
8.8.5
Access rights
Level Restriction
Service
All rights
Supervisor (pass-
word 123)
All rights except: Configuration / change machine
Standard (password
12)
All rights except:
- Configuration / change user
- Configuration / change machine
- Change diagnostics
Produce (no pass-
word)
All rights except:
- Change configuration (only turning devices on and off is allowed)
- Execute diagnostics
- Delete wires in the file menu
WARNING
Danger if operated by unqualified personnel!
▄
Only users with password level "Supervisor" can activate the password pro-
tection.
▄
Once the password is deactivated, all entries can be changed.
▄
The standard passwords must be changed and put aside. If a password gets
lost, the passwords can be reset. This is reserved for the user level "Service".