Schleuniger CoaxCenter 6000, Reference Manual, Page: 128 / 194

13. Maintenance / maintenance schedule
128 | 194
Reference Manual |Edition 5.0 (09-2016) | CoaxCenter 6000
13.2
MAINTENANCE SCHEDULE
The maintenance schedule summarizes the work.
Maintenance task Page Duration Interval Personnel qualification
Cleaning the housing and
the processing area
(129) 5 Min. Daily "Operating personnel
(Page 16)"
Empty waste container rota-
ry incising unit
(129) 2 Min. As needed "Operating personnel
(Page 16)"
Cleaning Q - Cam 360 lens
area
(130) 2 Min. As needed "Operating personnel
(Page 16)"
Blade change cutting unit (131) 10 Min. As needed, when the
processing quality is
bad.
"Qualified personnel
(Page 15)"
Blade change rotary incising
unit
(132) 15 Min. Improper processing
quality
"Qualified personnel
(Page 15)"
Belt change feeding unit (134) 5 Min. Cable length not exact,
jacket damaged.
"Qualified personnel
(Page 15)"
13.3
MAINTENANCE / REPAIR WORK
The maintenance involves regular cleaning work and the replacement of wearing parts.
Before disassembly a component we recommend to make a drawing or to take a picture of the part.
This is helpful, especially if the repair work takes longer to complete.
DANGER
Hazardous mains voltage!
With mains connection, there is a hazardous mains voltage present in the
fuses and inside the machine. Contact with current-carrying parts can result in
serious injuries or death.
Before carrying out servicing tasks, always switch off the machine and discon-
nect the mains plug.
NOTICE
Cleaning!
■
For cleaning do not use aggressive solvents.
Painting and plastic parts may be damaged.
■
Do not use compressed air for cleaning.
Dust and conduction parts may lead to malfunction of the machine.
Clean the exterior casing and the plastic parts with a soft cloth and a usual
commercial cleaning agent.