10
ENGLISH
9b Connect the cable to the Alarm Assembly.
»
Locate the screws in step 9d before beginning this step so they will be handy when you
need them.
The connector fits only one
way. Match the dot on the
connector with the dot on the
circuit board.
9c Install the Alarm Assembly.
1. Align the tab with the notch as shown.
2. Route the cable into the channel.
3. Then slide the Alarm Assembly toward the door.
Align tab with
notch.
IMPORTANT!
Check that tab is
aligned with notch. If
not aligned, you may
have to remove the
whole lock and start
over.
Route the cable into
the channel to avoid
crimping the cable.
Summary of Contents for SENSE
Page 16: ......
Page 17: ...Guía de instalación CERRADURA INTELIGENTE ...
Page 32: ......
