17
MANUAL PROGRAMMING CODES
If the solution access is temporarily lost, changes to the lock can be entered manually at the
lock’s keypad. See Manual Programming Functions on the inside front cover
for more information.
Lights/Beeps Legend
Three lights and
three beeps
1
Step Confirmation:
A correct entry was made during programming
and accepted by the lock.
One long flash and
one long beep
1
Function Confirmation:
A set of steps was completed successfully.
One long flash and
two beeps
1
Error:
An incorrect entry was made during programming or lock already
unlocked. For other errors, see the troubleshooting section on page 21.
Backlight:
Entire keypad glows blue during programming and/or when
any button is pressed.
Programming Legend
Programming Code (six digits):
See
Programming Code
on page 16
for more information.
#
Hash Button:
• Used for programming.
• Used to turn on the backlight.
User Codes (four digits):
See
User Codes
on page 16 for more
information.
Keypad Numbers:
• Used for programming.
• Used to enter a user code to unlock the lock.
1 Beeps will sound only when the beeper is turned on. Low battery beeps will sound even when the beeper is disabled.
See inside front cover for Manual Programming Functions.
Summary of Contents for LE162
Page 7: ...5 1 4 Mark and drill 25mm hole in door edge A B door width 25mm drill bit C D ...
Page 8: ...6 1 Door preparation continued E F G H ...
Page 11: ...9 2 Lock installation Install the latch according to the direction the door opens closes ...
Page 28: ...FOLD BACK COVER FLAP BACK COVER PERFS OFF PERF ...
