KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Installing the KC9111/KC9111-2 or KC9321/KC9321-2
57040-E Page 9 04-2007
8) Alignment of Interchangeable Cores:
9) Tighten the Four Screws in the Baseplate:
10) The Dead Latch’s “Critical Edge:”
•
If an IC Core is used, center the interface toward the
bottom.
•
Tighten the four baseplate screws in the fol-
lowing order:
> Tighten
a
and
b
until snug.
> Tighten
c
and
d
until snug.
> Fully tighten
a
and
b
.
> Fully tighten
c
and
d
.
> Check all four screws to make sure that
all four are completely tight.
b
c
a
d
•
For clarity purposes only, photo on the
right is a view of deadlatch with escutch-
eon removed.
•
Edge (
a
) is referred to as the dead latch’s
“
critical edge
.
”
IMPORTANT: In the next step, the “critical
edge” on deadlatch will have to be lined up with
hole (b) in baseplate. See
Position the Dead
Latch’s Set Screw Hole: on page 10
a
b
