Schlage HK-CR, User Manual

Page: 41 / 88

37
Service Menu
The Service Menu commands provide information that helps you determine if the
HandReader is operating properly and within normal operating parameters.
Once you have entered the Service menu, there are three options available for navigating
the command menu system.
• Press
#
Yes
to enter the command shown on the display.
• Press
*
No
to step to the next command in the menu.
• Press
Clear
to exit the command menu (pressing any numeric key also exits the
command menu). If you are in a command’s sub-menu, you may have to press
Clear
multiple times to completely exit the command menu.
There are three commands available from the Service command menu.
• Calibrate – Run calibration to check HandReader exposure values.
• Status Display – Check the status of HandReader inputs and outputs, the hand read
score of the last user to verify on the system.
• Network Status – Check the network communication status of HandReaders in the
HandKey system (master HandReader only).
Refer to table 6 and identify the commands you need to perform. Step through all
previous commands until you reach the desired command. All commands are listed in
menu order.
Table 11-6: Service Command Menu
Service Menu
Password = 1
Calibrate
Recal (N/Y)
Status Display
On/Off (Y/N)
Network Status
Status Information
Navigating the
Service Menu
Service
Commands