8
Main Circuit Board
Battery
J4
J9
Figure 10
16. Reinstall the back plate onto the chassis. Reinstall grounding screw and/or ground lug. If a ground lug is present, do not allow it to
come into contact with J7.
17. Secure the back plate with the four screws removed in step 5.
18. Line up the slots at the bottom of the reader’s back with the four hinge pins at the bottom of the wall mount. Slide the reader to the left
so the pins go in the slots. This fastens the reader to the wall and wall mount and forms a hinge.
19. Reconnect all external connections removed in step 3.
20. Power up the unit and reinstall the J7 jumper (if applicable).
21. Secure unit to wall mount with key. Upgrade is completed.
© Allegion 2015
Printed in U.S.A.
70200-0013 Rev. 05/15-f
Customer Service
1-877-671-7011
www.allegion.com
