23
BRUSH CUTTER
TROUBLESHOOTING (cont.)
COMMON PROBLEMS
COMMON CAUSES
Extra vibration when engaging the
blade.
Make sure the throttle lever is set to the “STOP” position, engine
has stopped, and the blade has stopped spinning before
checking blade.
•
Check for a broken or bent blade. DO NOT straighten blade.
Replace bent or broken blade with a new Schiller Grounds Care, Inc.
blade.
•
If the blade appears to be in good condition, check the bolt
connecting the blade and verify that it is tightened and properly
seated.
•
Remove blade and check blade balance
•
If the problem still persists then contact a local dealer for service.
The blade will not spin.
•
Make sure the Blade lever on the left handle is being held down while
the engine is on.
•
Stop the engine, disconnect the spark plug wire before checking.
Check the condition of the blade belt
Reinstall, replace or retension
as necessary. If the bade still doesn’t
operate, consult your dealer for
service.
TROUBLESHOOTING
