4
TRUCKLOADER
SAFETY
Interrupting operation
-
Before leaving the operator's position:
- Move throttle to the SLOW position.
- Shut off the engine by moving the switch to the
OFF position.
-
Move the throttle to the SLOW position, turn key
to the OFF position and wait till all moving parts
have come to a complete stop.
- before refueling;
-
Move the throttle to the SLOW position, move
switch to the OFF position, wait till all moving
parts have come to a complete stop and
disconnect the spark plug wire(s) or remove the
key:
- before clearing blockages or unclogging chute;
- before checking, cleaning or working on the
machine;
- after striking a foreign object. Inspect the
machine for damage and make repairs before
restarting;
- if the machine begins to vibrate abnormally:
shut off machine immediately. Inspect and
make repairs as needed before restarting;
- except for repairs or adjustments as specifically
noted, such as for carburetor adjustment,
where the engine must be running. Keep
hands and feet clear of moving parts in these
circumstances.
-
Allow the fan to come to a complete stop when
stopping operation to clear blockages, unclog,
inspect the machine, do maintenance or repair.
-
Reduce the throttle setting to SLOW during
engine shut-down. Move switch to the OFF
position.
OPERATION SAFETY
In general
-
Use extra care when loading or unloading the
truckloader onto a trailer or truck.
-
Slow down and use caution when making turns
and crossing roads and sidewalks.
-
Do not run the engine in an enclosed area where
dangerous carbon monoxide fumes can collect.
-
While operating the machine, maintain a safe
operating position, secure footing, and good
balance at all times.
-
Before operating, install intake hose and
discharge chute.
-
Keep a safe distance between two or more
operators when working together simultaneously.
-
Keep clear of the discharge opening at all times.
Never direct the discharge toward a bystander.
Stop operation if someone approaches.
-
Never leave a machine unattended. Always turn
off engine, set throttle to SLOW, switch is in OFF
position, and fan has come to a complete stop
before leaving machine.
-
Maintain machine according to manufacturer's
schedule and instructions for maximum safety
and best results.
-
Never look into the hose or discharge chute while
machine is running. Never operate machine
without intake hose attached properly.
Starting
-
Start only according to instructions in this manual
or on the machine.
-
When starting the engine, make sure hands and
feet are clear of the intake hose.
-
Do not start the machine while standing in front
of the discharge chute or with the chute directed
at someone.
-
Do not change engine governor settings or
overspeed the engine. Operating the engine
at excessive speed can increase the hazard of
personal injury.
