HOSE
HOSE FLANGE
BRIDGE CLAMP
BRIDGE CLAMP
HOSE BANDS
1
2
TRUCKLOADER
SET UP INSTRUCTIONS
INSTALL HOSE AND BOOM ARM TO
HOUSING (SEE FIGURE 1 FOR ASSY)
1. Remove hose from box and stretch it.
2. Hold the hose, and stretch each end as far as
possible to open internal diameter.
3. Slide bridge clamp over each end of hose.
4. Insert hose flange in one end of hose and tighten
bridge clamp.
5. Place hose bands over hose, near flange end.
6. Get boom arm assembly and attach chains to
hose bands with bolts and nuts.
7. Place boom arm pivot shaft into housing tube.
8. Install knobs onto hose flange. Leave knobs
loose.
9. Push hose flange studs into front plate notches
and turn to lock. Tighten knobs to secure into
position.
10. Install hose nozzle/handle assembly, onto other
end of hose. Orientate handle to desired position
and tighten bridge clamp.
