SERVICE SCHEDULE
TO PREVENT INJURIES: STOP THE MOTOR. APPLY PARKING BRAKE. REMOVE THE IGNITION
KEY. DISCONNECT THE WIRE FROM THE SPARK PLUG(S) AND KEEP AWAY FROM SPARK
PLUG(S) TO
PREVENT ACCIDENTAL STARTING
.
Daily:
-Check for any damage on the hydraulic hose. The hydraulic hose must be replaced if there is any small
damage.
-Check for any signs of loose bolts and tighten as needed. Check mounting bolts at frequent intervals for
proper tightness in order to prevent costly repairs. Make sure your snowblower is in safe working condi-
tion.
-Check chute rotation chain for excess slack.
-Check skid shoe (see installation section).
-Check from to time the wearing on the cutting edge to
make sure you do not wear out the base of the snow-
blower’s chassis. This cutting edge is reversible. All
you have to do is unscrew the bolts and turn the cut-
ting edge, reinstall and tighten the bolts securely.
50 Hours:
-Check drive belts for proper tension and signs of
cracking.
100 hours:
-Check the oil in the gear box annually. If necessary,
add AGMA 5 EP or SAE 90 oil. The gear box should
have a total of 155 ml of oil or filled to the rim of the
bolt hole when installed on the snowblower. (see
figure)
12
SERVICE
Summary of Contents for 75-70666
Page 2: ...2 ...
Page 19: ...PARTS SECTION PARTS SECTION 17 ...
Page 20: ...PARTS BREAKDOWN SB448 SNOWBLOWER 18 ...
