Installation and commissioning SET DATAEAGLE X-treme IO 2730
Status LEDs
DIL switch
Chapter 3 – Structure
The table shows the meaning of the LEDs on the radio mod-
ule:
Under the transparent cover there is a DIL switch for select-
ing a certain operating behaviour.
To remove the cover, remove the 3 cover screws and care-
fully remove the cover. Please make sure that no foreign
matter or moisture enters the module when the cover is
open.
To close the cover, press on the cover firmly and screw in
the 3 screws as well.
Name
Colour
Function
ON
green
red static
red flashing
Power ok
Input voltage too low (<9Volt)
Input voltage too high (>30Volt)
RX
yellow
Radio data reception
LINK
blue
Bluetooth connection established
„ON“
„RX“
„LINK“
Name
Position Function
DIL 1
„off“
„on“
Outputs switch off in case of radio interruption
>2s.
Outputs are held.
DIL 2-5 „off“
no function
DIL 6-8 „off“
reserved, position "off" mandatory
„DIL1- DIL8“
