Installation and commissioning DATAEAGLE COMPACT 2XXX
5-14
Chapter 5 – Extension and exchange
Double-click on the device name, then double-click on
„Interface“ and double-click on „Int. IO Port“.
The current configuration of the I/O modules is shown:
In this example two I/O modules are already installed and a
third one is added.
The address of the new I/O module is shown to the right of
„Adress of IO card“.
Ensure that the address switch at the I/O module match-
es the shown address.
Click on „Type of IO card“ and select the desired I/O
module, e.g. 6IO/2AI/2AO (0-10V)
Summary of Contents for DATAEAGLE 2 Compact Series
Page 66: ......
