WELCOME TO SAgA
Saga is a no-compromise, ultra-high-end preamp cleverly disguised
by its low price. You won’t find any volume-control chips or other
shortcuts in Saga—just uber-quality techniques as used in the
most expensive audio gear. That’s why it has a relay-switched
stepped attenuator volume control that can be run fully passively—
or connected to a unique hybrid 6SN7 tube buffer.
ONE
Saga
ONE
Power cord
ZERO
Stick-on feet (!)
(they’re pressed in)
IN THE bOX
The following is required by the roughly 9,542 government agencies and regulations we have to comply with. If you have
some common sense, they should seem pretty straightforward. In any case, read these instructions before proceeding
farther, follow all instructions, and heed all warnings. Or else!
1. If you don’t know how to install audio devices, get a qualified professional to help.
2. Never use this device near water, and clean only with a dry cloth.
3. Assure adequate ventilation, do not block any ventilation openings,
or place near heat sources.
4. Use only the supplied power cord or suitable replacement. Route cords away
from traffic areas and protect them from being pinched. Unplug the cord from
the outlet if the apparatus is unused for a long period of time.
5. To prevent electric shock, do not use the plug with an extension cord, receptacle,
or outlet unless blades can be fully inserted.
6. Refer all servicing to qualified service personnel. Service is required when the
device has been damaged, including cord or plug damage, liquid has been spilled
or objects have fallen into the device, the device has been exposed to rain or moisture,
does not operate normally, or has been dropped.
SAFETy INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS DEVICE TO RAIN OR MOISTURE.
Application for Council Directives 72/23/EEC
Conformity declared for EN60065, EN50082-1
