SCH-06
06002000
230VAC 20W
CONNECTIONS
2
3
4
5
6
3 Coaxial Input. Connect your coaxial out-
put source with . . . wait for it . . . a coaxial
cable! Very exciting.
4 USB Input. Use a standard USB A-B cable
to connect—2m or less in length, true USB
2.0 rated. Note that some audiophile USB
cables can’t handle USB 2.0 speeds. Yes,
even in this day and age.
5 Optical Input. Use a standard Toslink
cable to connect to the optical input. If
you’re using an Apple computer with inte-
grated optical output, you’ll need a Toslink
with a 1/8” (3.5mm) plug on one side, and a
standard Toslink on the other.
1 RCA Single-Ended Outputs. If you don’t
have balanced inputs, use these to connect
to your amp or preamp. We’ve provided two
pairs for your convenience. There’s no dif-
ference between them, and all outputs are
active all the time.
2 XLR Balanced Outputs. If the rest of your
gear is balanced, use XLR cables to connect
Gungnir to their inputs from these outputs.
You can use all outputs, XLR and RCA,
simultaneously.
6 BNC Input. If you have a source with a
BNC output, Gungnir provides a true 75 ohm
input. Connect this input with a true 75-ohm
BNC cable.
7 Power Switch. Up is on. Down is off. It
doesn’t go sideways.
8 AC Input. Plug the power cord in here.
Plug the other end into a wall outlet of the
correct voltage. Trying to run a 115V unit on
230V will result in a blown fuse, no music,
and a void warranty.
1
7
8
