15
Re-installation of stove after servicing
Position stove spigot immediately
beneath liner spigot of chimney.
Position narrower strip of insulation
around the locking band with joint
to the rear.
1.
4.
2.
5.
6.
Slide liner spigot down inside the
appliance spigot and seal using the
fire cement, rope gasket or similar.
Slide adjustable cover down 5mm
past insulation. Position final insulation
around spigot with joint to the rear.
Slide locking band into place around
the joint on the liner. Now tighten the
bolt on the locking band around the
joint of the liner.
Slide adjustable case down over the
insulation to cover the appliance spigot.
3.
