10 Troubleshooting
D21775 issue Q3
Note:
You must switch off the motor before changing tools! In order to preserve the collet
chuck's accuracy and service life, a tool or the protective pin provided from factory must
always be clamped - even when the unit is not being operated.
Caution: To avoid bending of the tool shafts at high speeds, always insert the
tools used as far as possible into the collet chuck in order to achieve the maximum
holding force!
10
Troubleshooting
10.1
How to proceed in case of malfunctions and errors
Error messages immediately disappear from the display as soon as the knee plate or foot
pedal is released or the fault is eliminated. This means there are no waiting times for re-
starting.
If a fault can not be solved with the above procedure, please contact an authorized service
partner or Schick directly.
10.2
Fault and error messages
The Q3 control units have intelligent control electronics that recognize possible malfunc-
tions and can show them as an error code on the display or via the ready LED. If a fault
occurs, this is indicated by "ERROR-01".
Example of error message: ERROR 01
The malfunctions / error messages are divided into catego-
ries, the category being indicated by a flashing code on the
ready LED.
The Q3 foot control device only shows the error category by flashing the ready LED.
Hold on here
to
on
