The menus for pregas time, irradiation and gas (irradiation) look similar.
You can change the time by pr/- for both minutes (the numbers
to the left of the colon) and seconds (the numbers to the right of the colon).
The ramp function offers a curing program with a power variation curve. Please enter the time with the desired initial UV power as well as the time,
in which the UV power should be increased to the desired final UV power. The device will linearly increase UV power during the second period of
time until the final UV power is reached.
Attention: the sum of all partial times of the ramp must be less or equal
to the set irradiation time.
Please touch the home button to return to the overview for manual operation.
By touching the save button, your individual program settings
can be named and saved to the memory of the device and later be
accessed via the disc button .
Manual operation (hand button)
This window contains an overview of current settings for the manual operation:
Pregas time
indicates the time necessary to displaceoxygen from the
polymerization chamber by flushing it with nitrogen before the LEDs switch on.
Irradiation time
specifies the duration of light curing and how long the
LEDs will be switched on.
Ramp
is a special way to cure objects by controlling the initial light intensity.
Gas (irradiation)
indicates the time of gas flushing the polymerization
chamber with the LEDs switched on.
The hand button activates the parameter settings for manual operation. The circle button starts the light curing with the settings from the
overview. By touching “Save manual program”, these settings can be named and saved as an individual program which will later be accessible via the
disc button . The home button will return you to the main menu. To setup your program touch the hand button .
4. Operation
Touch screen: main window
The main window displays the status of the device`s components:
Green represents full functionality and red symbols an error.
Please contact us, if a red status persists for a longer period of time.
Please note that the lid status will change while opening and closing the lid.
The 3 buttons on the right side of the main window allow manual
operation of the device (hand button ), activation of pre-saved programs
(disc button ) and access to the settings (gear button ).
