INTRODUCTION
TEDDY is Schertler’s latest generation compact stage monitor.
Specially designed to be the perfect on-stage partner, TEDDY provides the performing musician
with 200W of power, without taking any of the limelight: the monitor’s sleek shape and “low
profile” enables it to be placed close to the performer for maximum audibility, without creating a
visible obstacle for the audience.
TEDDY features a coaxial speaker for constant sound directivity, with a specific inclination angle
that makes it ideal for both standing and seated performances.
The monitor’s intuitive control panel includes a single Sensitivity knob (rather than a common
volume control) for adjusting the signal level from -9dB to +6dB. This enables finer regulation of
the signal sent from the mixer. The EQ switch provides two pre-shaped curves for adjusting the
sound, while the Ground Lift switch protects the signal from unwanted ground noise.
XLR input and output connectors allow a chain of several monitors to be created – all connected
to the same audio signal path.
Like all latest generation Schertler amplifiers, TEDDY is fully analog.
PRACTICAL ADVICE
When you are using an amplified speaker, one of the most important recommendations is to
avoid at all costs a distorted input signal.
In other words, when you are controlling the sound on your mixer (or any other preamplifier), you
must avoid reaching saturation level.
In the case of amplified speakers, the arrival of a distorted signal (square wave) may damage the
internal amplifier beyond repair, which may in turn damage the loudspeakers.
Correct use of speakers guarantees their long life.
Summary of Contents for TEDDY
Page 1: ...TEDDY stage monitor ...
Page 7: ...NOTES ...
