background image

WARNINGS

PRECAUTIONS

WARNINGS

Please read this manual carefully before using your 

GIULIA Y amplifier and observe all safety precautions

Keep this manual for future reference

Do not pour any liquids onto this device, or operate it in excessively humid conditions. 

Do not use or install this device near sources of excessive heat. Do not expose it to direct sunlight, or position it in a 

dusty environment without any form of protection. 

Ensure that the mains voltage does not exceed the value indicated on the back panel. 

Do not use this device if either the mains cable or its plug is not in perfect condition. (Replace if necessary.)

If the mains cable needs replacing, it must be done by an appropriately qualified person. The replacement cable must 

be exactly the same as the original. 

To avoid interference, do not use this device near power transformers, TVs, RF transmitters, electric motors or any 

other source of electrical energy.

Do not point a microphone towards any speakers as this could result in feedback (Larsen effect) and ultimate damage 

to your device.

Only use the original connection cables – if supplied with the device. Otherwise this could prove both costly and 

inconvenient.

To completely disconnect this device from the AC mains, remove the power cable plug from the mains socket.

When cleaning, do not use solvents (e.g acetone or alcohol). These could damage the external finish and the serigraphy.

Do not attempt to service this device. If any malfunction is detected, call the nearest technical assistance centre, or a 

specialist technical centre.

To maintain good ventilation, never cover or obstruct the heat sink with blankets, sofas or any other furnishings. 

Always leave sufficient clearance between the heat sink and any other surface.

No flammable sources, i.e. candles, should be placed on or near the device. 

This device should never be exposed to water, even in small amounts. No object containing liquids should be placed 

on or near the device.

This device should only be connected to a mains socket outlet that has a protective ground.

When using or installing this device, always make sure that the mains socket and the mains cable plug are easily 

accessible.

Summary of Contents for Giulia Y









Reviews: