background image

ALL SCHERTLER® PRODUCTS ARE COVERED BY A LIMITED THREE-YEAR WARRANTY (FROM 

THE DATE OF PURCHASE) AGAINST MANUFACTURES DEFECTS. DETAILS CAN BE OBTAINED 

FROM YOUR LOCAL DEALER/REPRESENTATIVE. SCHERTLER SA STRONGLY BELIEVES IN 

“COMMON SENSE” AND THUS, MISUSE OF OUR PRODUCTS ARE NOT COVERED UNDER 

RIGHTS OBTAINED THROUGH OUR WARRANTY POLICY OR THAT OF INTERNATIONALLY 

RECOGNIZED TERMS AND CONDITIONS.

SCHERTLER SA IS CONSTANTLY AIMING TO IMPROVE ITS RANGE OF PRODUCTS THEREFORE, 

SCHERTLER SA RESERVES THE RIGHT TO AMEND PRODUCT 

SPECIFICATIONS WITHOUT NOTICE.

THE SCHERTLER® NAME/LOGO ARE REGISTERED TRADE-NAMES/ TRADEMARKS OF 

SCHERTLER SA, SWITZERLAND.

All SCHERTLER® PRODUCTS ARE OF PROPRIETARY TECHNOLOGY AND COVERED BY ONE 

OF MORE WORLDWIDE PATENTS.

TECHNICAL SPECS

Input impedance:

Maximum input level:

Maximum output level (through L/R):

Sensitivity (accordingly to Gain):

Total Gain (through L/R):

Frequency response: (-3dB)

Low EQ:

High EQ:

Equivalent input noise (EIN):

Distortion (THD+N; @1kHz):

-30dBu input level

0dBu output level

Power consumption:

Size & Weight: 

20 kohm

+28dBu (@1kHz; THD<0.5%)

+27dBu (@1kHz; THD<0.5%)

-24dBu to 15dBu

36dB

8Hz – 90 kHz

500 Hz (Shelving)  -16dB / +16dB

1.2 kHz (Shelving)  -15dB / +14dB

109dB (Direct out, 25dB Gain, 150ohm) 

0.09%  

(2nd harmonic)

0.05%   

(3rd harmonic)

0.02%   

(4th harmonic) 

0.011%   

(5th harmonic)

105mA

36x58x475mm;  0,5 kg

Summary of Contents for Arthur ART48 STEREO IN









Reviews: