background image

grounded in accordance with all codes and ordinances.  Never remove the
grounding prong or modify the plug in any way.  Do not use any adapter
plugs.   Check with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded.
  If the tools should electrically malfunction or
break down, grounding provides a low resistance path to carry electricity away
from the user.

5.

Double insulated tools are equipped with a polarized plug (one blade is
wider than the other).  This plug will fit in a polarized outlet only one way.  If
the plug does not fit fully in the outlet, reverse the plug.  If it still does not
fit, contact a  qualified electrician to install a polarized outlet.  Do not
change the plug in any way.
  Double insulation       eliminates the need for the
three wire grounded  power cord and grounded power supply system.

6.

Avoid body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators.  
There is an increased risk of electric shock if your
body is grounded.

7.

Do not expose power tools to rain or wet conditions.  Water entering a power
tool will increase the risk of electric shock.

8.

Do not abuse the Power Cord.  Never use the Power Cord to carry the tools
or pull the Plug from an outlet.  Keep the Power Cord away from heat, oil,
sharp edges, or moving parts.  Replace damaged Power Cords immediately.
Damaged Power Cords increase the risk of electric shock.

PERSONAL SAFETY

9

.

Stay alert.  Watch what you are doing, and use common sense when
operating this product.  Do not use the Wet Grinder while tired or under the
influence of drugs, alcohol, or medication.
  A  moment of inattention while
operating this product may result in serious personal injury.

1

0

.

Dress properly.  Do not wear loose clothing or jewelry.  Contain long hair.
Keep your hair, clothing, and gloves away from moving parts.
  Loose
clothes, jewelry, or long hair can be caught in moving parts.

                                                                                                                     

PAGE 3

                        

1

1

.

Avoid accidental starting.  Make sure the Power Cord remains unplugged from
its electrical outlet until this product is completely assembled, filled with water,
and ready to use.

1

2

.

Do not overreach.  Keep proper footing and balance at all times.  Proper

 

 

 

 

Summary of Contents for TIGER2000S


















Reviews: