www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
GB | 25
15. Troubleshooting
The table below contains a list of error symptoms and explains what you can do to solve the problem if your tool fails to
work properly. If the problem persists after working through the list, please contact your nearest service workshop.
Fault
Cause
Remedy
Engine will not start
No fuel in the tank.
Fill the tank up.
Fuel valve closed.
Open the fuel valve.
Air filter dirty.
Clean the air filter.
Engine switch is set to "OFF".
Set the engine switch to "ON".
Recoil starter defective.
Repair the recoil starter.
No engine oil.
Refill the engine oil.
Spark plug dirty.
Clean the spark plug
Engine oil level too low (oil warning
lamp is flashing).
Refill the engine oil.
On/off switch for motor operation
set incorrectly.
Set to the correct position
Engine is running loudly/
irregularly
Spark plug dirty
Clean/replace the spark plug.
Air filter severely dirty
Clean/replace the air filter.
Fuel contaminated/stale
Drain and replace the fuel.
Choke lever set to "CHOKE"
Set the choke lever to "RUN"
Incorrect fuel - diesel instead of
petrol
Drain the fuel and fill with the correct fuel
No electrical output
Fault in the a.c. power generator
For service under warranty, inform your repre
-
sentative
Engine will not switch off
Ignition switch-off wire defective
Close the fuel valve and wait until the engine
shuts off; call customer service
