www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
GB
| 31
13. Troubleshooting
The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your equip-
ment fails to work properly. If the problem still persists after working through the list, please contact your nearest ser
-
vice workshop.
Fault
Possible cause
Remedy
The equipment does
not start
• Correct starting procedure not followed
•
Sooted or damp spark plug
• Incorrect carburetor setting
• Blade or nylon cutter mounted incorrectly
•
No fuel in the tank
•
Follow the instructions for starting
•
Clean the spark plug or replace it with a new
one
•
Contact an authorized customer service outlet
• Reassemble the blade or nylon cutter
•
Check the fuel level
The equipment starts
but does not develop
its full power
•
Incorrect choke lever setting
•
Soiled air filter
• Incorrect carburetor setting
• Cutting blade blunt
•
Set the choke lever on the
position
•
Clean the air filter
•
Contact an authorized customer service outlet
•
Have cutting blade resharpened /replaced
The engine does not
run smoothly
•
Incorrect electrode gap on the spark plug
• Incorrect carburetor setting
•
Clean the spark plug and adjust the electrode
gap, or fit a new spark plug
•
Contact an authorized customer service outlet
If the temperature of
machines is too high
• Engine
is overloaded
•
Insure the machines have rest at regular time
Summary of Contents for 5910706917
