17 І 56
www.scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
Troubleshooting
Problem
Possible cause
Solution
The device does not start.
The battery is discharged.
Charge the battery.
The battery is not inserted.
Insert the battery.
The safety switch has not been activated
correctly.
Switch on.
The on/off switch is faulty.
Repair by an authorised service centre.
The tool works intermit
-
tently.
Loose internal connection
Repair by an authorised service centre.
The on/off switch is faulty.
The safety cutter bar gets
hot.
The safety cutter bar is blunt.
Have the safety cutter bar checked or re
-
placed (service centre).
The safety cutter bar has notches.
Too much friction owing to lack of lubrica
-
tion.
Oil the safety cutter bar (2).
Poor cutting quality
Too much friction owing to lack of lubrica
-
tion.
Oil the safety cutter bar (2).
Dirty safety cutter bar
Clean the safety cutter bar.
The safety cutter bar is blunt.
Have the safety cutter bar sharpened or
replaced (service centre).
Bad cutting technique
See “Working with the tool”.
